Thermal Insulation
Equipment Room Insulation
Insulation for electrical rooms, control rooms, telecom cabinets, equipment shelters and enclosed machinery areas.
Equipment Room and Shelter Insulation
Electrical rooms, control rooms and telecom shelters house equipment that performs best within a stable temperature range. Insulating the enclosure reduces the heat load on cooling systems and helps hold temperatures steadier through the day.
Falcon insulates enclosed equipment spaces and cabinets, using thin, lightweight systems where space is limited.
Actual insulation performance depends on product grade, substrate, thickness, ambient conditions, surface preparation and application conditions. Final performance shall be based on approved technical data and project requirements.
Thermal InsulationWhat We Offer
Electrical room insulation
Reducing heat gain into rooms housing switchgear and panels.
Control room insulation
Steadier temperatures for control and instrumentation spaces.
Telecom cabinets and shelters
Insulation for cabinets and shelters exposed to the sun.
Machinery enclosures
Insulation for enclosed machinery areas.
Space-saving aerogel
Thin systems where every centimetre of space matters.
Reduced cooling load
Less heat for the cooling system to remove.
Technical Snapshot
- Spaces
- Electrical rooms, control rooms, telecom cabinets, equipment shelters and enclosed machinery areas
- Purpose
- Reduce heat gain and stabilise internal temperature
- Systems
- Conventional and aerogel insulation
- Considerations
- Available space, weight, fire requirements and access
- Surface preparation
- Surfaces cleaned and prepared before application
- Inspection
- Thickness and finish checked and documented
Where It’s Used
Referenced Standards
Applied as applicable to the product, governing standard and project specification.
How We Insulate an Equipment Room
- 01
Survey the enclosure
Construction, exposure, space and access.
- 02
Select the system
Material and thickness with any fire requirement.
- 03
Prepare and apply
Applied to the agreed surfaces per method statement.
- 04
Inspect and record
Finish checked and documented.
Frequently Asked Questions
Will insulation replace air conditioning?
No. Insulation reduces the heat load on cooling — it works alongside your cooling system rather than replacing it.
Is aerogel suitable for cabinets?
Its thin, lightweight profile suits cabinets and enclosures where space is limited. Suitability is confirmed against approved technical data for your application.
Can rooms be insulated from inside or outside?
Both can be considered. The better option depends on the enclosure, access and requirements, and is confirmed during the survey.
Ready to Start Your Next Project?
Get in touch with our engineering team for a free consultation and a tailored proposal for your site.